HELD UNDER THE PATRONAGE OF HIS EXCELLENCY DR. MOUSTAFA MADBOULY, PRIME MINISTER OF THE ARAB REPUBLIC OF EGYPT

  • Patronage Website 85X85 (1)

SEPTEMBER 2020 EGYPT INTERNATIONAL EXHIBITION CENTER

Exhibitor List

(CUS Group) Zhengzhou City Unites Steel Industries Co, Ltd

Egypt for Panel and Steel Industries was founded in 2011. the factory was set up inside the industrial zone in 6th of October city. Due to enormous development in Sandwich panel production technology we have established two production lines with the capacity of 4000 m2 to supply the market with high quality product that comply with the universal quality standard.

Cairo


A-Build Egypt For Contracting S.A.E

Abrasive blasting & painting, airport apron concrete paving, anti-acid flooring, anti-acid lining, anti-carbonation coating, Cathodic protection , cementitious fireproofing, concrete hardener, concrete inspection & analysis, concrete repair, Damp-proofing & waterproofing, Epoxy coating, epoxy flooring, epoxy road marking, epoxy terrazzo flooring, expansion joint, expansion joint cover, expansion joint sealant, Fireproofing, fire stopping, flashing & sheet metal, form & pump jacketing system, Geotextile, grouting & grout injection, Heat treatment, Industrial flooring, Moisture & thermal proofing, Oil facilities maintenance, Pipe wrapping, polyethylene sheets, Rubber lining, Scaffolding, sealants, standing seam sheet metal roofing, shotcrete, stainless steel pickling, Thermal & moisture protection, thermal insulation, thermoplastic sheet waterproofing, torch applied, Waterproofing & thermal insulation, weatherproofing cladding, waterproofing repair.


ACFA for building Solutions (ACFA Fiber Cement Boards & ACFA Walls EPS)

ACFA board is the perfect choice for building board applications such as wall cladding, wall partitioning, decorative walling, Ceiling treatment & floor leveling . ACFA board is reliable and suits any building type, residential, commercial and industrial buildings as well as schools and hospitals; especially where speedy construction, cleanliness and hygiene is of high importance..

Riyadh


Ahram Security Group

AHRAM is a leader manufacturing company in the field of mechanical security locks. Founded in 1945 by the late Engineer Ezzat Aref, we specialize in offering bench-marked security locks. AHRAM is committed to excellence in manufacturing world-class products which offer safety to consumers in everyday life. It swiftly became a well-known and highly respected name in the lock industry and has continued to increase its sales volume.

Cairo


AirMaster Equipment Emirates LLC

Since 1987, Air Master Equipments Emirates L.L.C has been operating in the middle east and the sub-continent. Over the decades we have engaged in the manufacturing of quality Air distribution, Air control and Fire safety products for the air-conditioning industry. We have also branched out into different areas of the construction industry in the past few years. We have an exclusive division for the manufacturing of Tapes and Adhesives for HVAC and Packaging industry. And also have a state of the art facility for the manufacturing of Fire rated steel and Acoustic doors . LED light fixtures and Fire fighting equipment are new additions to our trading division.

Ajman


Ajax Engineering Pvt Ltd

AJAX was established in 1992 for manufacturing Self-Loading Concrete Mixer and today is the Global Leader in this product. Over the years, it has substantially expanded its product range to also manufacture Batching Plants, Transit Mixers, Concrete Pumps and Boom Pumps. The company is headquartered at Bangalore and has state-of-the-art manufacturing facilities at Doddaballapur and Gowribidanur, near Bangalore. AJAX products are backed up by pan India dealer network with over 100+ touch points geared up to provide timely and quality product support, that is unmatched in the industry. Today, over 16000+ equipment are working satisfactorily throughout the country across varied applications ranging from CC Roads, Bridges, Irrigation Structures, Canal Linings, Railways, Power Projects, Buildings, Factories, Foundations, Urban Development, etc.

Bangalore


Ajyad

Cairo


Al Andalosia for Air Outlets

Manufacturer of air-conditioning accessories & ventilation components since 1990, Andalosia position as the markets one a leading supplier, both in Egypt & Middle East, is now well and truly established. This is the result of unwavering commitment to continuous and extensive research in technological development. Through ongoing investment and technological development, andalosia remains one step ahead by offering an extensive and innovative range. We are primed & readyfor growth over the next 50 years!

Cairo


Al Dhabi False Ceilings - Hunter Douglas - GSP Ceilings

We are the sole licensee to manufacture GSP Ceilings UK products and Hunter Douglas metal ceilings in Egypt. In addition, we also produce our own metal profiles. Since our establishment in 1998, we planned to be a part of major projects in Egypt. We participated in most of the mega projects in Egypt in the last 20 years.

Heliopolis


Al Manar Aluminum and Glass

Alexandria


Al Waseef Industries LLC

Al Waseef Industries L.L.C, is part of Al Waseef Group of Companies with its Headquarters in Jeddah, Kingdom of Saudi Arabia. The Group has diverse business portfolio with Branches in Dubai, U.A.E. and KSA. The group in February 2018 as part of its expansion plan acquired Metex Metal Expansion Factory, Manufacturers of Expanded Metal, located in Dubai Investment Park Two, Operating as a Branch of Al Waseef Industries. This has led to exciting opportunities for the two businesses to work together to develop their products and exploit operational synergies. Inspired by the most modern state of the art high technology machinery, dedicated team of Professionals to deliver quality service, Al Waseef Industries has undertaken to Manufacture a range of Ceiling and Partition profiles, Gypsum Ceiling Access Panel, T-Grid ceiling suspension system and Expanded Metal, offering our Customers complete solutions for all their roll formed requirements for use in projects in the U.A.E. and the G.C.C.

Dubai


AlAyed Group

Alayed Industrial Group was founded in 1976, located in Riyadh, Saudi Arabia. Alayed industrial group is a leading industrial and manufacturing group, manufacturing high quality products to meet the requirements of the local and overseas markets. Alayed Industrial Group includes several factories, Alayed Hoses Factory, Alayed factory for PVC compounding, Alayed Factory for Polyethylene Alayed Factory for Polypropylene Random Alayed Factory for Yarn Manufacturing (Polyester Yarn National Factory) and a number of sites of Stone Crushers to produce building materials also the Group has road transport fleet for transporting building materials around the kingdom .

Riyadh


Almasrya Bulk Moulding Compound

Almasrya for Developed Industries is a leading manufacturer of composite manhole covers and rain grills. Since the launch of its products in 2005, Almasrya has been utilizing cutting edge engineering and materials of the highest standards to produce premium customized products to suit every need and budget. Almasrya is a flagship of Egyptian SMEs industrial and engineering innovation with in-house developed technology and manufacturing facilities in Alexandria, Egypt.

Borg El-Arab


Alnahar

Over the years the company has grown to be an important entity in the Egyptian market by being the sole agent and distributor of successive international companies, including but not limited to: onduline (light roofing) factory, lindini factory (corrugated and asbestos-free flat panels) Cotto san michele factory. Over the years, Al Nahar has earned a reputation for quality, service and integrity among engineers, architects and contractors in the construction industry. AL-Nahar company are considered as one of the leader companies that specialized in the field of exporting and setting up the installation materials which use in covering the sur-face of all kinds of installation to protect them from the climatic change which cause them the damage and corrosion with an aesthetic form. As present more of modern and safe style by using the best international materials that produce according to standards of international and European qualities .

Damietta


Aluminco S.A

Oinofyta Viotias


ALU-PANEL

ALU-PANEL™ is the flagship brand of aluminium composite panels for ‘Mohammed Riaz & Partners LLC’ and is the first of its kind to be produced in The Sultanate of Oman. Mohammed Riaz & Partners LLC specialize in the production of high grade Aluminium Composite Panels. We produce Colored Fire Rated Panels, Signage panels as well as panels for Interior use such as kitchens

Barka


Angela Plast

ANGELA PLAST Egyptian Branch was established in 2018, located in Beni Suef Industrial Zone, Egypt. Its business scope mainly includes PPR, PVC fittings system, especially focusing on the production and development of valves. ANGELA PLAST, founded in China in 2009, is a modern company based on R&D, sales and service integration. Quality assurance is the only and forever implementation standard of the company. ANGELA PALST Egypt Branch strives to enter the Egyptian market with the help of its long-standing technical ability and talent reserve, so as to meet the needs of Middle East countries for PPR and PVC fittings and valves, and provide effective technical support and more convenient services to customers. Hope to cooperate with the vast number of powerful customers at home and abroad.

Beni Suef


AP&C

AP&C is the only Egyptian company Specialized in moulds’ making materials from polymers and resins. We possess around 25 years experience in epoxy, Polyurethane resins & silicone rubber. We serve the following Industries: GRC, GRP, PLASTER, FOAM injection, Metal Foundry, Sanitary ware, boats... We also supply epoxy, Polyurethane adhesives, fibreglasses, carbon fiber & PVC Foam sheets.

Nasr City


Arabian Gulf Manufacturers Companies LTD (AGM)

With headquarter in Jeddah-Saudi Arabia, Arabian Gulf Manufacturers Ltd popularly known as AGM is an advanced High-Technology plastic Manufacturing Company that is the leader in entire Middle East. Founded in 1965, AGM has grown to more than 90,000 square meters of facilities using state-of-the-art equipment. With 45 years of combined experience in plastic manufacturing industry, people of AGM have the unique knowledge and experience necessary to meet customer's expectations a step beyond others in the field and setting the benchmark in today's exciting world of Plastics. With a strong foot hold in Saudi Arabia having branch offices and show rooms all around KSA, we spread our wings to Europe, Asia, Africa and Middle East to feel our presence on world map of plastics.

Jeddah


Arabic Identity

Arabic Identity is an Egyptian company, founded in 2011 by our founder Medhat Saad in Cairo, Egypt. we are specialized in contracting, procurement, and commercial agencies. We are the exclusive agent of Pusmak Machinery in Egypt and Arab countries. Pusmak Machinery is a Turkish company established in 2009 in Kayseri, Turkey as they serve in the industry of isolation since then. They are specialized in producing water-proofing machines (poly-urea) as well as thermal insulation machines (polyurethane). Their quality policy makes them different from other companies. With their innovative approach in the industry of isolation, they enable ease of application to the customers all over the world. For other difficulties in application, they continuously produce machinery and equipment that by using technological and technical possibilities can solve all the problems and make them easier. The working principle of their machinery is simple. They provide more than 10 choices of machinery for all investors in any sector. And they have machinery in the capacities and properties desired and machinery that can be operated by 220v and 380v electricity. In addition, they offer generator integrated machineries in case of problems in electricity supply.

New Cairo


Ari Makina San. Paz. Ltd. Sti.

Arı Makina San. Was founded in 1984 in Karaköy Thursday Market, the hardware center of Istanbul. Paz. Ltd. Sti. started its activities by marketing wholesale construction and technical hardware materials. He started his production life in 1987 in Kartal, Istanbul by manufacturing pipe sheets for galvanized and metal pipes.

Istanbul


Arnon Plastic Industries Co. LTD

Established in 1999, ARNON Plastic Ind. Co. Ltd is one of the leading industrial groups In Saudi Arabia. The company manufactures its products in 6 modern facilities specialized in producing: 1. Polyethylene Foam (PE foam): Rolls & sheets being produced in Dammam, Riyadh and Jeddah to serve the industrial, construction and building material sectors. 2. Polystyrene foam (PS foam): Food packaging solutions being produced in Dammam and Jeddah to serve the restaurant, agro, bakery, supermarket and poultry sectors 3. Polyethylene Terephthalate (PET), Polypropylene (PP) and High Impact Polystyrene (HIPS): Packaging solutions being produced in Dammam and Riyadh to serve the Dairy industry/Water bottling industry and food packaging Industries like restaurants, agro, bakeries, supermarkets and poultry sectors 4. High Density Polyethylene (HDPE): Blow molded bottles produced in Riyadh to serve the dairy industry. 5. Extruded Polystyrene (XPS foam): Heat insulation boards produced in Dammam to serve the building material sector. ARNON Plastic Industries is renowned as a leader in its business​ through its relentless quest to exceed its customers’ expectations in Quality, service, innovation & products.

Dammam


Artstone Panel Sistemleri A.S.

Becoming operational in 2005 as a pioneer and innovator brand of decorative wall panels, Artstone Inc. carries the understanding and vision of decoration in Turkey to a different area and allows creative solutions inspired by the nature in all spaces. It forges ahead to be the representative of quality and trust as a successful business partner of project solutions, operating at home and abroad with its young, dynamic and visionary team. "Artstone Decorative Wall Panels", which are all designed and produced in Turkey, is the brand that does not keep up with the fashion but creates the fashion with its own line and unique models.

Istanbul


Ask Mak

AskMak is the exclusive agent of GMZ, one of the leading Turkish companies in the field of wall paper, where we produce wallpaper made in Turkey.

Cairo


Asterm Isi San. Tic. Ltd. Sti.

Valtemo is designing, developing and producing sanitary solutions since 2007 with commitment to excellent quality. All products are extensively tested, to ensure a long-lasting life in your bathroom. Valtemo among the pioneers of change in Turkey, as a product of all the knowledge and cooperation, worldwide. Valtemo, with a wide range of services that is the best way to evaluate the information and cooperation network.

Istanbul


Baek Jo sink Co. Ltd

Baiyao

Zhicheng Steel is a professional company in dealing in producing and selling of galvanized, color coated steel coils, Galvalume steel coils and other high-quality steel products. Our company has grown into a large iron and steel products suppliers with production, processing, distribution, and logistics. We got import and export right in 2002, then strengthened and expanded our business with more than 50 countries. Such as, Southeast Asia , the EU, Russia, Ukraine , Latin America and other countries The annual sales volume of steel products exceeded 800,000 tons and total amount reached 3.5 billion RMB.

Jiangsu


Baramki- Egypt

Baramki-Egypt founded in 1983, specialized in production of Rubber foam expansion joint fillers, Rubber products for road traffic and parking accessories, Compact Rubber sheets and pads used in many different applications, Rubber flooring and tiles, Rubber Mats, EPDM sheets and tiles, Reclaimed Rubber.

Cairo


BASF Master Builder Solutions

At BASF, we create chemistry for a sustainable future. We combine economic success with environmental protection and social responsibility. The approximately 114,000 employees in the BASF Group work on contributing to the success of our customers in nearly all sectors and almost every country in the world. Our portfolio is organized into five segments: Chemicals, Performance Products, Functional Materials & Solutions, Agricultural Solutions and Oil & Gas.

Cairo


Benayat

Starting 1999 Benayat has been extremely active in this field of construction and urban development, for the past 25 years. The experience of Benayat includes, but is not limited to: 1. Construction of integrated projects including electromechanical works and infrastructure development 2. Turnkey high quality finishing services 3. Furniture, Furnishing & Equipment projects

Cairo


Bengbu Saier Time Industry and Trade Co., Ltd

Beijing Saier Industry & Trade Co.,Ltd was established in the year of 2000, which is specialized on designing, developing, manufacturing and marketing stone glue products. Our head company was situated in Daxing Industrial Zone of Beijing with predominant geological location and strong research capability. We are the top 5 largest manufacturer of stone glue in China with extensive scientific researching partner, senior expert and wide sale channels. We establish our branch factory in Shanghai and Bengbu successively with total area of 80,000 square meters and annual production ability of 800,000 metric tons.


Bin Ghurair Trading LLC

​Bin Ghurair Trading was incorporated in 1990, initially starting as a specialty supplier of Fire Rated & Non Fire Rated steel doors, frames & ironmongeries, servicing the construction industry. During the past 27 years, the company has evolved into a leading distributor and manufacturer of these products. The company management has always looked beyond the present day and has been concerned to keep in touch with the market’s needs and requirements. Now we are full fledged with many types of FORT® Fire rated Doors branched out in GCC Countries. Bin Ghurair Trading has always been a front-runner in the architectural supply products.

Dubai


Brett Martin Ltd

Brett Martin is a world class manufacturer of plastic sheet material used in a range of applications worldwide. The Marlon range of polycarbonate includes multiwall, corrugated and flat sheets for rooflighting and glazing applications. 60 years’ experience in the industry has earned Brett Martin the marketing expertise to support its distributors in their markets and the technical expertise to advise on specific projects from design & specification to installation. Our Marlon sheets are manufactured in Brett Martin’s UK based BS EN ISO 9001:2008 accredited factories.

Northern Ireland


Business France

Business France is the French national agency for export and globalization. We are in charge of supporting companies through their development abroad, including prospection, export and foreign investment. We promote the French know how, attractivity and innovative companies. Business France has 1500 employees spread throw-out the world in 70 countries.


Camara De Comercio De A Coruna

Coruna


CHANGZHOU DAHUA GROUP

Changzhou Dahua Imp. and Exp. (Group) Corp., Ltd was established in 1997, Dahua Group is the largest foreign trade company in Changzhou city, and we are one of the top 15 foreign trade companies in Jiangsu Province.

Jiangsu


Cheil Grinding Wheel Ind. Co. Ltd

Since 1955, CHEIL GRINDING WHEEL IND.CO.,LTD. , has been manufacturing high Quality grinding wheel products to meet the wide range of industrial grinding,cutting and finishing applications. In addition to the tight quality control standards, high performance, safety and durability more than 150,000 different specifications have been manufacturing in variations of Vitrified, Resinoid, Rubber,Epoxy, Mgo, CBN, Diamond Wheel. Since the first introduction of K-PRIX, our representative brand name in 1984, they have earned worldwide reputation as the combination of quality, cost and service.

Gyeongsangbuk-Do


Chema Foam

We strive to be the pioneers of environmentally friendly modern construction technology through the joint efforts of all partners of our success and keen on continuous improvement and development to provide diverse engineering solutions and innovative and unique innovative building systems

Cairo


Chimiver Panseri Spa

Customer focus, an immediate response to market needs and synergy among the staff are some of the ingredients that have motivated Chimiver to produce complete lines of products for different types of flooring: parquet, resilient, resin and outdoor. Innovative solutions and continuous investments have enabled Chimiver to be present today in more than 60 countries all around the world.

(BG)


Conotec co., ltd

"Conotec Co.,Ltd. is a maker of quality product ranging from a digital temperature controller to a digital humidity controller, digital panel meters, digital panels. We will make a constant effort to meet the challenges of the new era of technology, information in research and development as well as more accurate & trustworthy products production. It is widely used for the industrial refrigerators, freezers, air-conditioners and heaters. Also used for the temperature control at many low-temperature storage, environment, factory automation facilities and also show-case such as bakeries, meat markets, fruits and fresh product vendors within large discount stores. Main products : Digital temperature controller, Digital humidty controller, Multi panel controller, Heat Pump controller, Low HP controller, Chiller controller, Oven controller, Counter&Timer, CO2 controller, PID controller, Control Panel, 485 converter, Transmitter"

Busan


Daehan Heavy Industry LLC

We manufacture the highest quality product with full confidence that "One-time customers will become all-time royalty customers". Our products are designed to be reliable, durable and easy to service reflecting our engineering know-how and extensive experiences in the field application. The high level of customer focused services will ensure the efficient operation at a lower cost with little maintenance requirement. We will always be ready to serve your needs at any time you request.

Daejeon


Daghash

Daghash Group was established in 1981, it started working in the field of home awning and umbrellas. We extended our scope of works to cover the market needs; we are now successfully working in the following fields: Tensioned fabric structures Temporary & Light Weight structures Parking & Modular shades Events tents & setups Umbrellas & foldable shades Awnings and automated shades The main administration and factory are located at El-Marg El-Gadida, Ring Road, Great Cairo.

Great Cairo


DELABIE

Initially specializing in domestic sanitary fittings, DELABIE quickly repositioned in public buildings: from prisons to hospitals, through airports, universities, etc. DELABIE has become a leading player in the non-domestic sanitary fittings market. DELABIE water controls and equipment are installed wherever quality is essential and in the majority of large-scale projects: the Stade de France in Paris, the European Parliament of Strasbourg, Barajas Airport in Madrid, the Shrine of Mecca, Saudi Arabian prisons, the ICC tower in Hong Kong, etc. This worldwide presence is possible through the brand’s compliance with most international standards as well as the relevant standards in each country.


Diamond for Import and Export

Diamond is one of the best-known names Egypt-wide in the Spare Parts for Ready mix concrete industry for batching, delivery, and pumping to the construction industry as well as the supply of high efficiency used concrete pumps and truck mixers. With many years of experience as a market leader, we are a key supplier to virtually every concrete producer in Egypt through our well-distributed warehouses to ensure the fastest service to our clients with huge expansion plans to improve our presence as close as possible to our clients. We offer the most comprehensive range of Spare parts for Ready mix concrete industry, all backed up by the largest stock holding of spare parts under one roof. We are passionate about our business. That is proven through high- quality products we supply and the excellent service we provide.

Giza


Directory of Egyptian Industry

Advertise in our directories and get them to reach your target customers. The Egyptian Industries and Companies Directories - MISR the Main source of Egyptian industrial and trade information for businessmen, investors, marketing managers, sales managers, export managers, public relations managers, procurement managers and factory engineers inside and outside Egypt. The Directories contains Data and information of Egyptian factories and companies such as telephones No., mobiles No., e-mails, Web Sites, Addresses, Responsible managers Names, Activities, and Products of final factories. In all the following industrial sectors: Manufacturing of industrial equipment - firefighting & security – Electricity & cables - lighting & electronics - electrical appliances - Refrigeration and air conditioning - electrical equipment- cars - Food Stuff - Chemicals - industrial detergents - soap and disinfectants – paints - building chemicals - fibers and refractories – feed – fertilizers- pesticides and veterinary products - chemicals water treatment - glass - medical and industrial gases - pharmaceuticals, medical supplies and cosmetics - Leather industry - Wood Industry & Furniture – Textile & Garments - Construction & Building Materials - Marble & Granite – Packing & Packaging - Petroleum and mining This information is available in both languages Arabic and English. It is published in printed book, on CD, on website, and mobile application,.

Cairo


Dubai Export - Department of Economic Development

Dubai Exports strives to ensure the success of the exports sector in Dubai and the UAE, providing constant guidance, advice and practical support to both overseas buyers and suppliers. We develop long-term growth strategies to help businesses expand and maximise their opportunities given by Dubai’s unique position as a natural trade gateway between the East and the West. Exceptional facilities and a logistics infrastructure that is unrivalled in the Middle East and among the most impressive and effective anywhere in the world make Dubai the global export capital.

Dubai


Dunlop Adhesives (Thailand) Limited

DAT Adhesives & Sealants, manufactured by Dunlop Adhesives (Thailand) Limited, produces high-performance, durable adhesives to suit the ever-changing needs of its customers. Upon request, our dedicated and proficient research and development team can produce tailor-made products for specific individual requirements. DAT Adhesives & Sealants is committed to providing high-performance adhesives with low VOC, Non-Toluene and Non-Formaldehyde formulations, which comply with Governement and Environmental regulations without compromising on product performance.

Thailand


DVD

Shira was founded in 2007. Shira is known in the Egyptian market as a leading integrator of water management and water saving solutions. Shira has 3 different market sectors through a portfolio of high quality products from our business partners DVD, Elysee, Rivulis, Hunter and Magnolith -Water and sewage networks -Landscape irrigation networks -Agriculture irrigation networks Shira is the sole distributor of DVD valves. DVD valves are produced by Dogus Vana which was founded in 1988 In Izmir, Turkey. DVD has wide range of ductile iron valves that includes but not limited to gate valves butterfly valves air valves swing and silent check valves strainers and dismantling joints with sizes up to 2400mm. As well as DVD is specialized in water hummer and water management solutions

Cairo


Dwyer Instruments Limited

High Wycombe


E.S.P.T for General Contracting and Supplies

"ESPT is a BBR network member in Egypt, provides a finest swiss technology for the posttension concrete in the market from slabs, bridges to LNG tanks, silos and Stay cables bridges, our company provides a range of services • Precast concrete • Posttension concrete • Tilt up concrete • Traditional construction Our company operates in the gulf region since 2004, and same services through knowledge in the Egyptian market since 2014.

Nasr City


Eb Ith.Taah.Ins.Malz.San.Tic.Ltd.Sti

EB Ithalat Taahhut İnşaat Malzemeleri San. Tic. Ltd. Sti. Import Area Gas Nailers Mechanical and chemical dowel systems In the application area; Passive Fire Stop anchoring Hydraulic cutting Installation of solar energy panels Our company started its activities in 2012. So far, many large projects, assign the signature to determine the quality of our company vision continues its activities in Turkey in line with the overall project. In addition, with our expert technical staff, we provide the necessary design and discovery services in all fields of activity.

Istanbul



Egyptian For Refractories

Suez


Egyptian United Company for Imp & Exp

Cairo


EITCO Terrain SDP

Gharbia Governorate


El Houbi Techno Metal

El Houbi Company has recently chosen Egypt to be the regional hub to drive growth and build deeper successes in African economies and the Middle East. Our target is the creation of knowledge to gain access to consumers outside of Egypt, and thus the transfer of knowledge to emerging markets. Egypt is considered the strategic region of the Middle East and Africa as a whole, which in turn, we seek to achieve our goals and will work on the Houbi investment company with immediate effect and strategic market research and product innovation.

New Cairo


EL-Mawkaa LLC

El-Mawkaa Brief El-Mawkaa is a platform which connects all construction industry stakeholders ٍin one place. It empowers construction firms and professional engineers, designers, and contractors by letting them market their experiences, apply on online Bids, and buy construction materials through El-Mawkaa Platform. El-Mawkaa also empowers suppliers by letting them market and sell their construction materials and products. Moreover, El-Mawkaa empowers property owners by letting them find the best designers, contractors to design/build their property and enables them to buy construction materials with special offers. It's also a platform for construction knowledge sharing and networking which enables users to ask questions and get answers from the community

Giza


E-Mak Makina Insaat Tic. Ve San. A.S.

E-MAK is the newest and most dynamic member of the Simge Group that was founded in 1977. At the outset E-MAK was established to manufacture machinery required by Simge Group Companies, in particular for asphalt production and its applications. In a short period of time E-MAK developed its own genuine technology and became a well-known brand. E-MAK’s new concepts and innovative productions are firstly tested and developed within Simge Group’s companies’ facilities under actual operation conditions then presented to the sector. This special advantage is the resource for many new inventions and designs.

Bursa


Empire Egypt

Empire, for trading (Import and Export) company specialized in trading high value products in all fields and delivering these products to the customers with the best prices and delivering times.

Heliopolis


Enterprise Greece S.A.

Enterprise Greece suggests the evolution of the former organization “Invest in Greece S.A.” incorporating, HEPO (Hellenic Export Promotion Organization) and the Hellenic Foreign Trade Board—to a new and innovative outward-looking body. Enterprise Greece is the official agency of the Greek State, under the auspices of the Ministry of Foreign Affairs, to promote investment in Greece, exports from Greece, and make Greece more attractive as an international business partner.

Athens


ERMAK

Ermak Beton ve Insaat Makineleri San. ve Tic. Ltd., a Company established in Istanbul, has been manufacturing since 1965 plants for concrete products such as concrete press for hollow blocks, for borders, tiles, roof tiles, concrete prestressed presses, as well as whole batching plants, , mixers, belt-conveyors, tile polishing, washing and split machines but also all kind of molds for these concrete products.

Istanbul


ESPA

ESPA is a company specialised in designing, producing, distributing and innovating in pumps, systems and water-management equipment for the household and residential sector. For half a century our company has been renowned for its constant innovation, service, the quality of its products and proximity with customers in a highly competitive international context. On-going improvement is a fundamental value.

Banyoles


Euromair

Euromair has the know-how of a family company present today in many European countries, but also in the Middle East, Africa and North & South America. As a precursor in the field of spraying machines, Europe Projection has become a recognized brand thanks to its founding values: • Manufacturing control; • Continuous technical innovation; • Reliability of equipment; • Proximity with customers; • The commitment and service spirit of its teams. Our priority: Technological advance at the best price. Euromair stands out with the development of innovative solutions to improve the comfort and speed of application of pasty and powders products.


XINZO WOOD FLOORING S.A.

Yvyra is one of the most recognized manufacturers of outdoor pallets internationally. Our vocation for details and passion for our products means that our wooden floors for interior and exterior have been prescribed and installed worldwide.

Barcelona


Ezhou Jinfeng Superhard Materials Co., LTD.

Hubei Ezhou Jinfeng Superhard Material Co., Ltd. was founded in June 1994 and is located in Ezhou, the famous hometown of Chinese diamond cutters. Located at No. 118 Yanji Avenue, Ezhou City, Hubei Province. After nearly 20 years of pioneering and enterprising, Jin Feng has continued to grow and develop in the fierce market competition, and finally emerged as the leader in the domestic diamond tool industry. The main products Φ300mm-Φ800mm stone slice production and sales and market share has been in the leading position in the domestic industry, with the market changes, the company not only develop new products. The products sell well in more than 20 provinces, municipalities and autonomous regions in China. Entrepreneurial spirit: Integrity and hard work to develop corporate style: Strict requirements, resolute and resolute, united and marching into the development strategy of all the people: creating a market to guide the market and advancing with the times. The company promises to provide high-quality and high-level products and full-quality after-sales service as the top priority of the company. The ultimate goal is to serve our customers. Business philosophy: to win the market with technology leadership, return customers with superior quality, and achieve a win-win situation with you. Service tenet: We are guided by the tenet of "Quality First, Credit First, Customer First, Small Profit and Multi-sale".

Hubei


Fabco Plastic Factory Co. LTD.

Established in 1975 and the factory produces plastic pipes and fittings from size 16 MM to 630 MM and 1/2 inch to 8-inch and these tubes include high pressures up to 16 bar low pressure It also includes water pipes, sewage, electricity, piping own body telephones, there are kinds of other types such as (PIXEL - and polypropylene - and Ahwaz) and all these kinds of tubes according to foreign specifications, the Vibiku factory job profiles for the pipes and pieces which can not be produced by injection (such as flanges - and bring reform and jealousy ...) and produces Vibiku factory hot water pipes and Alvinj own chili and accessories such as helmet safety of workers and the factory unit quality for all stages of production, raw materials and finished product control. It has Vibiku factory unit Metal Coating own molds injection, manufacture, maintenance and the manufacturers of export since they constructed to many Arab countries and Asian and African, including, for example: - Egypt, Sudan, Yemen, Iraq, Kuwait, Jordan, Algeria, Tunisia, Morocco, Qatar, Bahrain and the United Arab Emirates, Pakistan, Ethiopia, Eritrea, Djibouti and ... ..ntmah that, God willing, for more and more and in light of the conscious and wise administration, which supports export by all possible means, including, for example, to participate in all international exhibitions interested in the field of industry Aalbulastic

Dammamm


Fanzic Co., Ltd.

FANZIC is a well-organized manufacturer and exporter which specializes in supplying Fans & Blowers. We have been providing quality fans and blowers to customers throughout the world in 1987.

Hwasung


Ferrotech

Nasser city


First Sport

First sport are specialized in supplying and installation for artificial grass and synthetic surfaces for football pitches, tennis, athletic tracks and landscape, we are the exclusive agent for Hedef International Turkish company, providing our valuable clients premium quality, after sales services & maintenance and the technical support engineers for designing and servicing

Cairo


Foshan Topson Stainless Steel Co., Ltd.

TOPSON was established in Foshan China as a trustworthy manufacturer with over 15 years experiences for stainless steel decorative sheets(decorative stainless steel sheet) and metal fabrication works. We have a branch office in Qatar consisting of a team of sales engineer and a team of installation staff. They are responsible for engineering, project management and installation of Qatar projects.

Guangdong


FPC Coated Technical Textile (Saudi)

FPC Industrial Co is an advanced manufacturer of Coated Technical Fabrics, located in Riyadh in Saudi Arabia. FPC is a subsidiary of FIPCO, a Saudi public listed company established 30 years and one of the biggest producer of Polypropylene yarn. FPC stands on a production capacity of more than 3,600,000 sqm per month. FPC leads the middle-east market with a unique multifunctional coating and have a strong global position in technical textile market. The factory provides the entire range of PVC, PTFE,PU, Silicone and Acrylic lacquering through one continuous line yielding with final coated range from 1.5 to 3.2 width fabric and product total weight from 150 g/sqm to 1500 g/sqm. Our product portfolio covers signage (frontlit, backlit, blackout, mesh, banner), billboard, tarpaulin, side curtain, truck covers, tents and tensile membrane (PVC and PTFE coated glass fiber fabric, Silicon coated glass fiber fabric) and other specialized products.

Riyadh


Framecad

The FRAMECAD® System is the world's most transformative end-to-end steel frame design-and-build method, allowing you to mass-produce cold-formed steel buildings with the precision and accuracy determined by our system, without the need of factory assembler. FRAMECAD is the fastest way to design and build durable steel framed buildings anywhere in the world.

Dubai


Fuzed Magazine

FUZED, a Monthly Magazine Interested in Everything Related to Interior Design Architecture, Real Estate, Fine Arts, Products and we Introduce Unique and Explosive Ideas from Around the World to Meet All the Needs of Design Seekers. One of the most important goals of FUZED work in Egypt is to work as a liaison between all workers in the sector and all potential clients, taking into account the specificity of Egyptian heritage values and purchasing capacity and public taste to an audience of consumers and their impact on purchasing decisions.

Giza


Gapa MB, s.r.o.

GAPA MB, sro has been the owner of Ing. Pavel Gabriel deals with production and sale of mats and cleaning zones. It began its activities by developing two types of mats - the Openwell mat as the 1st cleaning zone for coarse dirt and the Shatwell mat as the 2nd fine dirt cleaning zone. These types have fulfilled the expectations of our customers and are still able to satisfy the demands of demanding clients on the cleanliness of buildings and interiors. With their quality, they have undoubtedly reached the European standard. With the development of the company, our product range has also expanded and today we offer a selection of more than eighty types of mats and accessories, such as entrance, textile, pool and industrial mats, drain boxes, mats with logo, door or staircase etc.

Mladá Boleslav


Geotech

For over 5 Years, Geotech has provided economical solutions to common infrastructure and site development needs. Geotech’s high-performance range of innovative geogrids has been continuously developed since being introduced in Egypt as the first geosynthetic products of their type. The outstanding performance of geotech® geogrids and geotextiles has benefited many of road, rail, runway, embankment and many other applications across Egypt provinces.

Cairo


German Arab Chamber of Industry and Commerce

The German-Arab Chamber of Industry and Commerce (GACIC) was established in Egypt in 1951. Representing more than 2500 members GACIC is the largest organisation in the framework of business cooperation between Germany and the Arab world. GACIC plays a pivotal role in Egyptian and German business cooperation. Our primary goals are: - To promote trade and industrial development - To enhance business cooperation between Germany, Egypt, Jordan and Lebanon. - To enhance business cooperation between Germany and the Arab world.

Cairo


German Pavilion

Berlin


German Pavilion

IEC – Berlin GmbH & Co. KG, founded in 1997, is a globally operating trade fair organizer. Together with experienced cooperation partners we organize participations at international trade fairs and specialized trade exhibitions in all the world’s great commercial centres. Our experienced staff know all important trade fair venues in Europe, Asia, Australia, North and South America and in Africa. For presentations by the German Federal and Regional Governments as well as companies and trade associations we offer full service. We take care of all tasks, from the general concept through expense budgeting, stand construction, transport/customs, organization of travel, to the opening ceremony and support on site.

Berlin


GETEC Partners GmbH

GETEC Partners is a supplier of Industrial Equipment and Parts in different fields with a main focus on concrete and concrete products industry. With a vast network of resources, many years of knowledge and solid backgrounds in a variety of industries, we pave your road to success. Part of our success is the close cooperation with some of the major European and American manufacturers, producers, exporters and importers. Thanks to this direct relationship, we are able to avoid the middle man and can always offer you up-to-the-minute pricing and availability.

Leer


GLOBAL GPS

GLOBAL GPS is a new private association established by (Ashraf Makram) with his long experience in the Egyptian market since 1987, providing technical and commercial solutions for various construction actives in CIVIL, GAS, EMP, HVAC, PLUMBING & FIRE FIGHTING. Our aim is to introduce new added value products range to meet the different needs of customers with reliable cost-effective solutions. Our international partners are: 1- TEMBO – India, pipes hangers and supports for various applications with global approvals (FM-UL). 2- ARMEG – England, drilling products range in concrete porcelain, wood & steel. 3- TERWA – Netherlands, construction precast products range & mechanical splicing couplers. 4- FIBRE TECH GRP – India, pipes for sewage, water & GAS industry. 5- ULTRA DIA – Belgium, for diamond core drilling & cutting accessories into reinforcement concrete. 6- DEWALT/POWERS Mechanical & chemical products range. Quality remains at the heart of our business.

Cairo


Golden Future Company

Mansoura


Gulf Extrusions LLC

Established in 1976, Gulf Extrusions LLC is the flagship company of dynamic multi-industry conglomerate - the Al Ghurair Group, built on over 40 years of experience in Aluminium Extrusion. The company was founded to meet the increasing demand for Aluminium Extrusions in domestic, regional and international markets for architectural, industrial, transport and automotive sectors. Gulf Extrusions with its six presses and its highly skilled and experienced workforce is able to produce 60,000 MT per annum of extrusion products, with rated capacity of 24,000 MT per annum for powder coating finish products, 4,500 MT per annum for anodized finish and offer more than 30,000 profile designs to choose for extrusion. Located to its raw material supplier, Emirates Global Aluminium, Gulf Extrusions is one of the largest extrusion plants in the region built on a reputation of superior quality, international experience, dependability and meticulous attention to detail has resulting in Gulf Extrusions’ rich portfolio of remarkable projects and structures enabling the company to firmly become top of mind for various stake holders in the Aluminium Extrusion industry. During the progressive stages of Gulf Extrusions, from its inception, the company not only has acquired a majority share in the local market but also strongly made its presence globally throughout the GCC countries, Middle East, Asia, Australia, Africa, Europe and Canada.

Dubai


Gulftic Certification

GulfTIC Certification L.L.C. is a pioneer UAE National company accredited internationally providing conformity assessment for products exported and imported to and from the GCC member countries present in Kingdom of Saudi Arabia, Egypt, India, Philippine, Pakistan, Russia, Italy, China, and Taiwan Province of China. As a service provider rooted locally, GulfTIC has an in-depth understanding of the region’s regulatory requirements, which are distinct and suited to the conditions and customs of the Gulf area, but nevertheless harmonized with international standards.


Hegazi Co. For Engineering & Sanitary Ware Trade

The Company was founded in 1989 by Eng. Refaat Hegazi in “NasrCity”, Cairo; with a showroom of 400 mt² and a ware house of 1200 mt².Business has started in “Sanitary Ware” trading and has focused on the following categories: - Drainage pipe lines and its fittings with all its materials and specifications (UPVC – Cast Iron – Poly Propylene “PPR” – Poly Ethylene “HDPE”). - Water supply pipe lines and its fittings with all its kinds (Galvanized Iron – Poly Propylene “PPR” – Poly Ethylene “HDPE” – ). - Finest selection and unique solutions for plumbing and water works pipe networks. - Fire Fighting fittings and valves.

Cairo


Helios Trading Panayoti Group

Panayoti group born into the tradition of introducing the roof tiles concept in the Egyptian market, founded since 1948 being the one and only to manufacture and produce the first tile in Egypt. Due to the high market demands to our products we decided to establish Helios Trading which is specialized in importing roofing and flooring tiles from all over Europe Today Helios Trading is achieving all the market targets with 2 main factories; TOGNANA the best and biggest factory celebrating 198 memorable years and looking beyond, distributing to more than 65 countries all over the world located in Italy. LA ESCANDELLA the largest on-site production capacity worldwide with 55.000 m2 manufacturing facility in Spain

Giza


Henan Daswell Machinery Co.,Ltd.

Daswell, a brand of high quality machinery solution from China. We are a company specializing in the research, design and production of concrete machinery, bolted silo and mineral processing EPC solution for more than 30 years. Our concrete machinery are on the top quality rank in China, and we have the biggest producing workshop in the world for bolted silo. Our main products are concrete machinery such as concrete batching plant, bolted silo, concrete mixer, concrete truck mixer, trailer concrete pump, truck-mounted concrete pump, concrete block machine, dry mortar plant, asphalt plant and so on, and mining processing EPC solution such as: calcium carbonate plant, silica plant, lime plant and so on. Till now, our machinery have been sold to more than 80 countries in the world such as Germany, USA, UK, Ireland, Norway, Australia, New Zealand, Russia, Brazil, Philippines, Thailand, Malaysia, Indonesia, Vietnam, Mexico, Colombia, Ecuador, Uruguay, Egypt, Nigeria, South Africa and so on. And we have several office and warehouse in the world to do better service for our customers. We are growing mainly by our good reputation year by year, as we always promise to supply high quality products with good service all the time.

Henan


Hepworth PME LLC

Hepworth manufactures, and markets integrated piping systems to the civil and building construction sectors. This business was established over 40 years ago in Dubai and now manufactures pipes and fittings in the UAE, Oman and in Qatar. In addition, it trades through operating companies in Bahrain and Saudi Arabia and exports throughout the MENA region. Corys Geosynthetics is a division of Hepworth that manufactures geomembranes in Dubai and trades regionally in related products including geotextiles.

Dubai


HG Asma Tavan

Gaziantep


HONGXIANG DECORATIVE MATERIAL

Taizhou Luqiao Hongxiang Decoration Materials Factory is a technology material enterprise specializing in the production and sale of decorative lines and decorative panels.

Zhejiang


HOPPEC Rubber Industries

Hoppec Rubber industry Flooring Factory was established in 2010 as the first rubber flooring factory in the field of sports in Egypt. Our mission is to meet the needs of our diverse customers by providing high quality rubber flooring with different thicknesses and colors to meet the needs of our customers. The company has been awarded the ISO 9001: 2008 certification and the "Egyptian Franchise in Egypt" certificate from the Egyptian Industries Federation, which is the largest of its kind in the world. Hoppec floors are trusted by its customers. Hoppec offers a product that keeps players and coaches safe from injuries, as the product is able to absorb violent shocks, especially in the load zone, when the weight is left and rebounded from the ground. In addition to maintain non-slip, reduce noise, and doesn't continue any harmful substances within it. Our rubber floorings have a distinctive modern shape, in keeping with the decoration of the place, and the style of operation, and it is able to meet the maximum different environmental conditions.

Sadat City


Imamoglu Sogutma Cihaz. San. Ve Tic. Ltd. Sti.

As İmamoğlu Refrigeration Devices , we entered the Industrial Refrigerator and Spare Parts sector in 1994 and continue to grow year after year without disturbing our stability. Refrigerator parts, industrial kitchen spare parts, spare parts for cold rooms and refrigerated parts with our wide range of product portfolio in the field have created a sales network in the world not only in Turkey. With our export map to approximately 60 countries, our company and our country to represent the best in the global sense is the first of our working disciplines.

Istanbul


Interplast

The Company’s headquarters are located in the Industrial Area of Komotini, in an area of 40.000 sq.mtrs., where the production unit of plastic pipes and fittings is located (PE, PB, PP-R & PVC). In Menidi, Attica, in an area of 6.000 sq.mtrs., where Interplast’s clientele customer service for Southern Greece is located, as well as the production unit of the brass fittings of its subsidiary ELVIOM S.A. Interplast pipes and fittings meet and exceed the requirements set by the European EN standards, the internationally accepted German DIN standards, the Spanish UNE, the British BS and the American ASTM standards. The outcome of the aforementioned is that Interplast pipes and fittings are certified by the following organizations, having been awarded over 25 Certifications. Our steady growth puts Interplast in the first place in sales of plastic piping systems for plumbing and heating in the Greek market. At the same time, the increasing export activity is proven through the large number of projects in all construction sectors in Europe and the Middle East

Komotini


Invest-Gate

INVEST-GATE is a multi- information platform that includes digital and print, dedicated to providing its readers with a key source of trusted news and reporting concerning the real estate market in Egypt. INVEST-GATE was established to keep readers up to date with industry trends and developments, providing them with useful information to assist in buying or investing in the Egyptian property market. Upholding the highest standards in real estate journalism, INVEST-GATE aims to deliver high quality, up to date editorial content to its reader, including daily news briefs, regular in-depth feature stories and interviews with industry thought-leaders, as well as, special market reports. The content is published in a variety of forms from written pieces in print and online to videos, infographics and reader polls to provide comprehensive coverage of important issues and an enjoyable and informative user experience. A full social media presence across Facebook, LinkedIn, You Tube, Instagram, and Twitter is also maintained to continuously expand the company's reach and reader base.

Cairo


ITA - Italian Trade Agency

ITA - Italian Trade Agency is the Governmental agency that supports the business development of our companies abroad and promotes the attraction of foreign investment in Italy. With a motivated and modern organization and a widespread network of overseas offices, ITA provides information, assistance, consulting, promotion and training to Italian small and medium-sized businesses. Using the most modern multi-channel promotion and communication tools, it acts to assert the excellence of Made in Italy in the world.


ITQAN Trade

Mohandseen


Izocam Ticaret Ve Sanayi A.S.

İzocam is the leader of the insulation sector in the Turkey and Region with more than half century of experience in design, production and distribution of insulation materials for thermal insulation, noise control, acoustic insulation and fire safety purposes in building, HVAC, industry and durable consumer goods fields. İzocam is committed to improving quality of life by promoting the use of insulation materials to conserve energy and protect individuals and their valuables from controllable hazards. İzocam holds the ISO 9001, ISO 14001, OHSAS 18001, ISO 50001 and ISO 27001 Certificate guidelines in its production plants, as an evidence of its commitment to a safe and clean environment, work safety and information security. İzocam products hold the CE mark according to the Construction Products Directive (89/106/EEC) and İzocam Glasswool and Stonewool products certified by EUCEB which only given for biosoluable products. İzocam Glasswool and Stonewool products also have Environmental Product Declarations as a commitment of sustainable development. Productions: • Glasswool • Stonewool • Extruded Polystyrene (XPS) - Foamboard • Expanded Polystyrene (EPS) - Izopor • Rubber Foam – Izocamflex & Optiflex • Polyethylene Foam - PEflex • Tekiz Insulated Sandwich Panels (Stonewool, PU, PIR) • Tekiz Corrugated Sheets

Istanbul


Jada for Steel Manufacturing

JADA Company founded in 1973, through the years the company developed to become one of the leading manufactures for steel and wooden doors in Jordan.

Amman


JDFF JCC

Through the effort and continuous hard work of its team, Aljazea Industrial was able to achieve a quantum leap at the level of providing products and services conformed to the highest quality and efficiency standards that are comparable to their counterparts from major international companies Enhancing its position as a leading industrial and economic group that enjoys reliability and excellence.

Riyadh


JIAXING WEIMING FLUORINE PLASTICS CO.,LTD

As the Manufacturer & Exporter, our products 90%exported all over the world such as southeast Asia, India, Bangladesh, Nepal, the Middle East, South America and so on .With more than 8 years experiences in this area, we trust we could become your best partner and provide our customers with high quality products.

ZHEJIANG


Kamaridis Global Wire S.A

KAMARIDIS GLOBAL WIRE SA. prides itself as one of the largest companies in polyurethane sandwich panels and one of the latest and largest producer of Black & Galvanized wires, Construction Nails & Hollow Sections manufactured in Greece. Over the past decade we have managed to achieve recognition in the Greek and the International market, with top quality products, promptness in delivery as well as reasonable pricing. Currently we are exporting 60 % of manufactured products to 60 countries in all five continents, leading the company to levels which classify it among the largest and henceforth strongest companies in Greece (ICAP assessed). Our wide range of products are ideal for: • Industrial facilities and warehouses • Cooling chambers and areas of constant temperature • Airports and shelters • Prefabricated constructions • Buildings for cattle and poultry breeding units • Exhibition areas and trade buildings • Containers and mobile sheds • Military establishment • Black soft (annealed) wire for construction and agricultural purposes • Galvanized soft wire for wire mesh netting either in sheets or rolls • Galvanized semi-hard wire for fencing • Heavy galvanized wire for reinforcement of power cables from the cable industry and for the construction of mesh known as "gabions” • Black Hard Wire for the production of different kind nails • Nails used in construction for carcassing timber

Thebes


Kandeel Industry and Trade

Kandeel Industry and Trade (KIT) was established in 1990 as a trading company, and January 2015 we celebrated our Silver Jubilee. The main activities of the company are import, export and distribution. Products are being imported from different countries based on market needs and potential opportunities. KIT developed a portfolio of agencies to establish a strong distribution network setup. KIT acquired SunBrightCo wet wipes factory in 2008. KIT is now among the strongest marketing and distributing companies in Egypt.

Giza


Kandil Steel

Kandil started since 1865, passing through several phases, Kandil focused on flat steel in the 1950s by trading in flat steel, initiating a small workshop for processing steel sheets. In 1980’s, Kandil started the first modern flat steel service center KAMA in 10th of Ramadan city. By 2000, Kandil Steel initiated the first privately owned cold rolling mill in Egypt followed by its first Galvanizing line. It also started up the pre-painted steel line in 2004.in 2016, JFE Steel acquired 16.5% of Kandil Steel shares, and become a real strategic partner to rely on for technical assistance and raw material supply. Kandil built its name as a reliable Cold Rolled, Galvanized & Coated flat steel supplier, in more than 30 destinations worldwide, covering many markets from Europe, USA, and MENA to Africa where the company has a representative office in Kenya. The company’s current production capacity is more than 600,000 tons/year.

Obour city


KDRO Lotus

KDRO LOTUS is a vibrant company with a history in international trading and a promising future. Since 2002 KDRO LOTUS has been an established brand name in Dubai, Cairo, Jeddah, Ajman, Melbourne. We are trading and supplying for natural marble, sofas, chandeliers, rugs, prefabricated kitchens and bathrooms, customized and standard. We are focusing on long-term reliable partnerships through accurate execution of contracts and agreements. We do so by caring for our customers, the environment, and global staff. We are proud to participate in relevant sustainability schemes that nurture the environment, whilst improving yields and quality.

Cairo


Kemet Corporation-Autodesk

Kemet Corporatation is Autodesk Value Added Distributor in Egypt since 1984. Autodesk makes software for people who make things across the manufacturing, architecture, building, construction, media, and entertainment industries. If you’ve ever driven a high-performance car, admired a towering skyscraper, used a smartphone, or watched a great film, chances are you’ve experienced what millions of Autodesk customers are doing with our software. Autodesk gives you the power to make anything.

Heliopolis


K-Flex Insulation

K-FLEX Insulation is an Italian manufacturing company specialising in the production of thermal and acoustic elastomeric insulation materials. The company has production facilities and subsidiary networks around the globe in order to supply their products to a worldwide customer base. Its diversified product range provides solutions for various market sectors, including building, transportation, petrochemical and renewable energy. K-FLEX Insulation is a worldwide market leader thanks to its focus on technological innovation and the quality of its products that play an essential role in energy consumption control and the reduction of greenhouse gas emission. K-FLEX Insulation is present in 63 countries, with 14 production facilities and more than 2.500 employees. In addition, the company has a strong commercial distribution network and branches, located all over the world, for the efficient and effective global distribution process of its products. The Company is UNI EN ISO 9001:2015, registered and has over one thousand additional certifications for products that guarantee quality, reliability and performance standards for the whole insulation market.

Heliopolis


Khedr Company - Premium

بدأت مسيرة خضر للصناعات المتكاملة في العام ١٩٩٢ بهدف تلبية احتياجات السوق المحلي والإقليمي وتقديم الأحذية الموحدة للشركات والمصانع. بعد فترة وجيزة أدخلت الشركة خطوط إنتاج جديدة وبدأت بتصميم وتصنيع أحذية وملابس ومعدات الأمن والسلامة العالية الجودة - وفقا لأعلى المعايير الدولية. ويعود الفضل في نجاح الشركة إلى تاريخ عائلة خضر في مجال الأحذية على مدار ١٠٠ عام، مع استخدامها لأحدث التقنيات وأفضل الموارد. Khedr Integrated Industries began its operations in 1992 to serve the local and regional market and offer uniform shoes. Soon after, the company introduced high-quality occupational safety products - with the highest international standards. The company’s flourishing success is owed to the Khedr family’s 100+ years of expertise in the footwear industry, in addition to the use of the latest production technologies and Grade A resources.

Obour City


KHK Scaffolding (UAE)

KHK Scaffolding & Formwork LLC is a leading manufacturer and trader of scaffolding and formwork products located in the Middle East, U.A.E. It is a part of the US$ 200 Million, Taurani Group of companies. KHK Scaffolding & Formwork (KHK) was established in Jebel Ali in 1991 with a mere production capacity of 750 MT per month. Over the years, the company has seen a gigantic growth With a manufacturing and production area of 51,000 square meters, and a workforce of 800 employees and equipped with the state of art machinery, the company manufactures approximately 50,000 tones of scaffolding annually.

Ajman


Kumkang King Co Ltd

Since our establishment in 1979, Kumkang Kind, a manufacturer of various formwork system and scaffolding products, is proud to have its products in more than 30 countries around the world. With the globalization, we have set up a global network from Korea headquater. Kumkang Kind America, Kumkang Kind Malaysia, Kumkang Kind Vietnam, Kumkang Kind India, Kumkang Kind East Africa and Kumkang Kind Indonesia are acting as Kumkang Kind's representatives in their respective regions. As Kumkang Kind has established several agents and distributors, wherever you go, you will always find our products nearby.

Seoul


Ladin

Ladin Fair Congress Organization Services was found in 1993 in order to organize exhibition, congress and events in various countries worldwide . Ladin Fair Congress Organization Services is the leading actor of Turkey in exhibition sector. Ladin Fair Congress Organization Services is authorized by Turkish Ministry of Economy with B-license to organize exhibitions abroad in variety of sectors. Ladin has encourages exporter companies to develop their business activities within the region and abroad. Since Ladin established organize international exhibitions all around the world such as Algeria, Morroco, Yemen, South Africa, Ethiopia, Pakistan, Greece, Syria and India. Especially Ladin is well know with exhibition in Algeria Maison, Siac, Batimatec. Ladin Fair Congress Organization Service mainly focus on providing new economic exhibition grounds for international and local firms.

Sisli-Istanbul


Lift Mart

Lift Mart is a third-generation family business specializing in elevators and escalators. We have pioneered this industry for 61 years, both in the UAE and the MENA region. The next market we are hoping to introduce Lift Mart in is Egypt & Africa. We are in search of an exceptional agents who can deliver the Lift Mart message of quality and reliability to people and businesses in Egypt & Africa. If you think this is you, please reach out to us.

Dubai


Luxe Perfil

Luxe Perfil SL manufactures aluminum products. The Company offers blinds, screens, drawer slats, fittings, rolling doors, and other related products. Luxe serves clients throughout Spain.

Chiva (Valencia), Spain


Mait Spa

Situated in Osimo, in the province of Ancona, Italy, MAIT is one of the leaders of foundation equipment sector, with an active organisation with employees in Italy and abroad in foreign countries, and is the only one to offer this type of product in this enormous industry, completely designed and built for specific application. Most drilling rig models have been desiged for multipurpose use and can be equipped with special kits for different foundation and geotechnical construction methods including, drilled shafts, caissons, continuous flight auger, diaphragms walls, down the hole hammer, pile driving, limited access, and stone columns.

Italy


Maklada SA

Since its creation in 1984, with the cooperation and assistance of Suzuki Metal Industry Japan, Maklada has strengthened its presence both in the local and international market. Indeed, the company is now present in Africa, Europe, the Middle East, the United States and South America. With its experience and its expertise, Maklada specializes in manufacturing steel son at low and high carbon and steel cables and according to international standards and / or customer specifications. In 2009, Maklada is equipped with a line of manufacturing of tendons (PC STRAND).



Maris Polymers S.A. Polyurethane Systems

Maris Polymers is an independed, privately owned Polyurethane systems house and one of the leading European specialist in polyurethane liquid applied waterproofing products and cold curing polyurethane resins for the Construction Industry. In addition, Maris Polymers proves technological leadership by offering a whole range of special solutions and customized products.

Inofyta


Marphelo for Pipes & Mixers

Beni Suef


MASA GmbH

Masa Germany has all the necessary experience for the production of high quality blocks made from light or heavy weight concrete. We can supply plant components incorporating product enhancement, pallet transport, cubing and packaging of the end product, depending on customer’s specific requirements.

Andernach


Massbetter Exhibition & Conference

MIE Group settled in Dubai, UAE in 2000. It is the earliest exhibition service organization established in Dubai in China. It has pioneered the participation of Chinese enterprises in the Middle East and Africa in international exhibitions. It has led the development of the domestic exhibition industry and made a successful "going out" for Chinese enterprises. Contributed.

Dubai



Material Bidders for Information Technology

“Material Bidders” is an information technology company developing a web-based application at www.materialbidders.com that constitutes a platform for buyers and suppliers of construction materials worldwide for a more “efficient”, “transparent” procurement process to get the “right” material. First, buyers such as Real Estate investment companies, Contractors and even individuals can reach a larger number of suppliers and get the best prices for all their purchases. Second, manufacturers/distributors of construction materials can reach a larger number of buyers, expand their exposure to the construction market locally, regionally and globally reaching new buyers and communicate more efficiently with their existing ones.

Cairo


Mathios Refractories

Mathios Refractories develops, manufactures, and sells first class refractory products and customized lining solutions for all major industrial sectors. We offer a complete services portfolio, spanning from engineering, production and procurement to installation, maintenance and repair servi

Athens


Mazaya Aluminium Factory

Mazaya Aluminum Factory, established in 1993 (1413H) , is one of the most prominent aluminum production factories in Saudi Arabia. Mazaya Products are durable , safe , easy-to-use and suitble for both home and commercial use.

Riyadh


MB Crusher

MB is a leading manufacturer of equipment for the construction, demolition and recycling industries. Applicable to any type of excavator, MB buckets are the most effective means for crushing, screening and separating inert materials directly on site, reducing costs and processing times while contributing to the environment.

Fara Vicentino


MEED Media FZ LLC

For over 60 years MEED has been a leading source of MENA business and projects intelligence. Attracting a key senior management audience through its content, MEED is a media brand that covers a spectrum of services that inform. MEED’s content services: MEED.com - online platform and magazine delivering news, market data, expert analysis and a range of added services including webinars, supplements and newsletters. Find out more on www.meed.com MEED Projects - a project tracking database that specialises in providing comprehensive, up-to-date and accurate project information. Find out more on www.meedprojects.com MEED Insight - offers latest research and in-depth analysis”

Dubai


Metavalve International

MetaValve International (MV) is a fast-paced trading company with long-term prospects in metal valves business, and a full-inline Valve provider in Oil & Gas, Paper & Pulp, Petrochemicals, Water & Sewage and Power Industries. We Synchronize between demand and supply through a professional trading manner in-order to attain mutual knowledge and experience in both technical and commercial sides of metal valves’ business, our guiding principal is to offer products and services to the Egyptian market in a way that we encounter and surpass the practical anticipations of our clients whom we consider business partners.

Cairo


Middle East Facility Management Association (MEFMA)

MEFMA is a non-profit professional organization, formed under The Dubai Association Centre (DAC) which has been established by the Dubai Chamber of Commerce & Industry, Dubai Business Events (part of Department for Tourism and Commerce Marketing) and the Dubai World Trade Centre. MEFMA aims at unifying the facility management industry in the Middle East, by conducting research, providing educational programs and assisting corporate organizations in creating sustainable facility management strategies. The association provides a standardized framework for facility management professionals, wider construction industry stakeholders and building owners / occupiers across the Middle East. Networking, education, knowledge sharing, thought leadership, legislative governance and B2B events are all significant components of strategic FM to be promoted, supported and implemented by MEFMA and its Members.

Dubai


Migamad Boards

MIGAMAD (Miguel Gallego Lopez) had its beginnings in a facility of 1500 square meters in the village of Potomarin (Lugo/Spain). Migamad currently has facilities of 40,000 square meters, of witch 8000 meters are intended for the manufacture and storage of wooden pallets for concrete machine.

Lugo


Mingshi

ZHEJIANG MINGSHI XINGXIN HVAC TECHNOLOGYCO., LTD. is the biggest subsidiary of Mingshi Company.Established in the year of 1999,the company now is one of the top manufactures of plastic and composite pipes,tubes,brass fittings,manifolds and valves in China.

Zhuji


Misr El Hegaz

Misr Elhegaz group of companies consider the oldest and largest leading plastics manufacturer in middle east and Africa. The group established in 1982 to meet the increased demand of high quality plastic products in both local and regional markets. Since that time the group continued to expand its factories covering different applications of plastics industries, moreover it become one of the pioneers in producing the raw materials used in plastic production. Misr Elhegaz currently owned 13 factories in more than 200000 SQM located in 10th of Ramadan industrial area in Egypt. All factories are equipped with the latest German technology and machinery to guarantee the highest level of quality products served by professional team to our valuable customers

Cairo


Mitas Generators

After establishing itself in the local market by methodically and continuously improving its manufacturing processes and expanding its product range, MITAS GENERATORS also began exporting its range of Power Generating Sets to other countries in 2002. Through a network of business partners spanning from Europe, to North Africa and the Middle East, we have managed to build a strong reputation among our clients over the years, for the reliability of our products and the personal attention we give to after-sales support.

Paphos


Modern Plastic Industry LLC

Modern Plastic Industry is part of Oasis Investment company, holding company of Al Shirawi Group of companies which is one of the largest and most diversified business conglomerates in the Arabian gulf. Since its establishment in 1971, as a trading and contracting company, the group has broadened its scope to encompass a cross section of products, services and industries ranging from printing & packaging, heavy fabrication, oil & gas, engineering, electromechanical and logistics

Dubai


Moran (Zenon Panel - Polymor)

Moran Company is one of the leaders in the Construction-Supplies business sector. It was Established in 1995,It always seeks improvements whether it is an internal improvement or a work related improvement. Our ambition is to ensure the full satisfaction to our agents and all appreciation to some of our customers and provide construction materials with high-quality, new technology, and fewer cost like Zenon Panel and Polyurea

Cairo


Mulk Holdings FZC

Alubond U.S.A is an Aluminum Composite Panels (ACP) and Metal Composite Material (MCM) Panels brand owned by Mulk Holdings. The company has emerged as the World’s largest ACP and MCM brand with a twenty-five million square meters of manufacturing and processing capacity from its various facilities in Europe, UAE, Turkey, Ghana and India. Alubond has also expanded its products to offer a full range of Fire Rated Metal Panels including A2 Mineral Core ACP, B Mineral Core ACP, Solid Aluminum, Honeycomb, Exotic metals MCM in a choice of metal skins like Galvanized Steel, Stainless Steel, Copper, Bronze and Titanium. The company in addition to the production of metal composites also has a complete backward and forward integration manufacturing facilities producing Fire rated Mineral Core, Fire Rated adhesive films and Color Coated coils.

Sharjah


Multi M Group for Metallic & Wooden IND.

MetalX Engineering Industries is one of the companies of Multi M Group for metallic and wooden Industries. MetalX is one of the leading companies in the Middle East in the manufacture of building products and accessories Like Expanded metal which uses in deference purposes such as Lathing and plastering works, fencing, Aluminum expanded metal for building facade - angle beads and corner mesh- building reinforcements – steel plaster stop, steel lintels, finishing bricks - metal architrave beads for doors & windows – and steel grating. And others products. As well as shelving units for warehouses in different loads and sizes according to storage area and storage units for storage in refrigerators for vegetables and fruits. The company has expertise in exporting and exported its products to the Gulf countries such as Kuwait - Saudi Arabia - Qatar - UAE - Yemen - Sudan - Morocco - Libya - Lebanon - Syria - Race - and also to European countries such as Cyprus - Greece - Italy - Germany - France - and to the United States of America - and some West and Central African countries.

Cairo


Murano Stone

Murano Stone designers are passionate to create new stone designs to provide the Egyptian market with a wide variety collection to satisfy our customer needs. Since our customer satisfaction is one of our main priority we provide you with after selling services to approach our client expectation.

New Cairo


Namtas Beton Mak. Urun San. Tic. Ltd. Sti.

Izmir


Nantong Toptex New Building Material Co.,Ltd.

Nantong Toptex new building material located in the ChangJiang delta, the famous of long life of living people –Rugao city, Jiangsu province, China. We are specialized in the produce and foreign trade together . we have passed ISO9001 in China,ITB in Poland and CE certificate in EU. The main products is fiberglass mesh tape, fiberglass alkali-resistance mesh, paper tape, metal corner tape, FRP grating and sanding screen and abrasive paper and sanding tools. The products are well received for the good quality and good service in USA. CANADA, BRAZIL , PERU,ENGLAND, GERMANY, POLAND, ITALY, RUSSIA, UKRAIN, TURKEY, EGYPT,SYRIA, UAE, BAHRAIN, ISRAEL, INDIA, SINGAPORE, JAPEN and other countries and regions etc. we have about 8000sqm modern workshops and modern machines.

Jiangsu


Nassar Group - Egypt

We are Nassar Group Egypt have more than 45 years of experience as a leading wire producing company in the Middle East, and through this period we have achieved a significant market share in different products of the wire industry all over the world such as - Drawn wire - Black annealed wire - Galvanized wire - Steel Fibers for Concrete reinforcements - Drywall screws - Self-drilling screws - Bolts - Carriage Bolt - Wood Screw - Hex Flange Bolt - Common Nails - Concrete Nails - Steel wool - Chain links - Straightened & Cut wire - Expanded metal mesh - Angle Bead - Brick Mesh Reinforcement - Brick Ladder Reinforcement - Wall wire ties - Welding Electrodes E6013 - CO2 Welding Wires - Barbed Wire - Chain link fencing

Qalioubiya


Nassar Plastic & Pipe Factories

Nassar Factories for Plastic were established in 1982 in Tenth of Ramadan City as one of the leading factories in producing UPVC pipes for different purposes by the Chemist/ Elsayed Ahmed Ismail Nassar.

Cairo


NEISCO

Neisco is leading integrated manufacturer and distributor of P.V.C Compound, pressure fittings, sewer fittings, valves, PP compression fittings and drip irrigation tubes in Egypt and worldwide. (For more information, you can check our website: - http://www.neiscoegypt.com). Our products are sold in many parts in the world including Europe, Africa and other destinations. Neisco is classified among the top pioneer manufacturers in the field of piping system industry and we strive to reach excellence through applying strict quality control system in all aspects of our workflow. Our products are widely used in different industries such as (Irrigation, infrastructure, and water treatment) and we have earned our reputation through the excellence of our products.

Cairo


Next Design Magazine

NEXT DESIGN is an Egyptian magazine concerned with architecture, design, industrial design, decoration and construction engineering in general. NEXT DESIGN aims at developing the Egyptian business sector in such field. Next DESIGN provides the Egyptian architects and designers with the platform to publish and share their ideas related to designs and intellectual inventions with the concerned community. NEXT DESIGN furnishes the public with general information, as much as possible, on this sector to be highly motivated to respect and take into account the designing and planning aspects as one of the architecture components in the process of construction, for purpose of promoting the Egyptian urban and architectural environment.

Cairo


Noorwood export&import

Damietta


OAIB

Since its establishment, OAİB has achieved a structure that articulates the problems of the sub-sectors in the field of business, produces solutions and successfully represents its members in domestic and international platforms in line with its purpose and vision.

Ankara


Onpo Madencilik Insaat San. Ve Tic. A.S.

Onat Gyps, founded in 2008 to operate in the sector of construction materials, started its investments with the objective of being the leading firm in Turkish plaster sector and penetrated into the market in September, 2011. Onat Gyps production plants, which are under the management of Onpo Mining Construction Industry and Trade Inc. based on 100% domestic capital, an affiliate company of Ali Rıza Onat Inc., are located on the 20th km of Ankara–Bala main road. The headquarter of the company is situated in Ankara. It has agencies and sales offices in Ankara, Istanbul, İzmir, Antalya and Samsun. Therefore, it could provide its clients with better service opportunities. With its 1.500 tones of daily production capacity, Onat Gyps aims to maximise both the product and service quality and customer satisfaction through its disciplined R&D trainings.

Ankara


Panelsan Cati Cephe Sistemleri San. Ve Tic A.S.

Panelsan Çatı ve Cephe Sistemleri Sanayi ve Ticaret A.Ş. was established by young entrepreneurs with the awareness of importance in construction sector in Turkey in Ankara Polatlı Organized Industrial Zone. Manufacturing plant is located on closed area of 18.000 m2 on the total area of 40.000 m2. Starting to manufacture Mineral Wool (Rockwool-Glasswool) and Expanded Polystyrene (EPS) insulated sandwich panel in 2004, Panelsan analyzed that the need for sandwich panel and EPS products as a result of awareness-increasing among constructional sector and investors about insulation in the changing and developing geography and commissioned manufacturing line of EPS insulation boards and injection packaging products in 2005.By 2010s, increased market share thanks to its provision of ‘reliability’ in the sector, RE-DE investments, importance given to institutionalization and total quality management and steps taken for branding keep Panelsan subject to decision-making process for new investments. By 2014, supporting its works and investments with Kaizen and 5S and creating high quality, safe, economic, esthetic and comfortable areas of living, Panelsan fed the reliability relation established with the customers and commissioned the line of Polyurethane (PUR) and Polyisocyanurate (PIR) insulated sandwich panel.Panelsan A.Ş. has become the first plant to have product and profile range which can respond to all the needs such as heat insulation, airimpermeability,hygiene, perspiration, reliability, safety, aesthetics,fire insulation and etc. in Turkey thanks to its of Polyurethane and Polyisocyanurate, Rockwool, Glasswool and Expanded Polystyrene insulated sandwich panels and EPS insulated products. It is atrademark preferred and used in about 20 countries in the Balkans, Middle East, Turkish Republics, Africa and Europe

Ankara


Pharaohes For Import & Export

Pharaohes company, a building material trading company, founded and managed by experts in the market, was established in the year 2001. It represents world renowned and reputed brand of products catering to the construction & building industry. Over the years Pharaohes company have developed an excellent sourcing network from different countries, identifying quality products to suit the ever changing market demands of Egypt .

Heliopolis


Pietrucha Group

The Pietrucha Group is an advanced Polish enterprise with nearly 60 years’ experience, specializing in the manufacturing and distribution of top-class and innovative geosynthetic products broadly used in civil engineering. The company’s offer includes a wide range of vinyl and composite sheet piling, specialized geogrids with stiff nodes, as well as mobile flood-protection systems. The Pietrucha Group delivers its products and services to customers in over 34 countries on 5 continents, especially in regions sensitive to the impact of climate change. The Group operates three production plants in Poland and the Philippines, trading and service companies. The manufacturing processes have the ISO 9001:2008 accreditation.

Poland


Planet Sol - M. Charalampidou & Sia O.E.

Planet Sol is a manufacturing company of solar water heaters- solar tanks - solar collectors.Located in Greece. Our abroad business activities are in European countries like (Portugal-Italy-France-Spain) and Lebanon and Africa. All our products are of high quality and have certifications as Solar keymark- CE - EN12975 - EN12976 Our goal is to cover all your needs even the most demanding by offering great flexibility and unbeatable prices.

Athens


Pliteq

Pliteq is an engineering firm dedicated to the design and manufacturing of sound isolation systems for residential and commercial applications. Harnessing the natural sound and vibration dampening properties of rubber, our patented solutions provide effective and efficient reduction in sound transmission through walls and floor/ceiling assemblies. Commitment to research and development is what sets us apart. We have patents registered in 23 countries worldwide, and have several more patents pending and under development. Pliteq engineers have completed over 700 acoustical laboratory tests in the last ten years, and have committed to a monthly testing schedule as we consider only recent test data to be relevant for engineering purposes. Pliteq is continuing on a growth trajectory and is a leading innovator in acoustic vibration and sound control on a global scale.

Dubai


Precision Storage Vessels Pvt. Ltd.

Precision Storage Vessels Pvt Ltd is a highly specialized storage tank manufacturer concentrating in High capacity Water Heaters, Indirect Heated Water Heaters, Oil & Gas Fired Water Heaters,Hot water storage tanks, Compressed Air tanks, Air Receivers, LPG tanks, Blowdown Vessels, Chilled Water Buffer Tanks, Boiler feed tanks, Surge Vessels, Expansion vessels and other products in pressure vessels category. Our mission is to satisfy customers by providing the highest quality pressure vessels, satisfying all regulatory standards and legal requirements

Dubai


Premier Decoration Elements

Premier is established in 2010, specialized in Home decoration elements in order to serve all those who are searching for different home decor ideas providing them with the best quality and best price.

Cairo


PREMIUM FOR GENERAL SUPPLIES

Emerging the markets with PPE products ofhighest quality and lowest prices. Premium for General Supplies is a fast-moving trader established in 2015 based in Egypt carrying out more than 20 years of experience from professional experts with deep depth knowledge in personal protective equipment (PPE) trading, design, build and installations of smart safety. Premium is dedicated for supplying fit-for?purpose personal protective equipment & clothing to fulfil our individual customers’ requirements. Premium has expanded our capabilities and product range to integrate the supply of related and branded promotional items & clothing due to a worldwide developing marketplace. This leading position drives us to maintain our superiority.


Prensoland S.A

Since 1959, PRENSOLAND has been manufacturing machinery and equipment for the production of prestressed and precast concrete elements, such as COMPACTA installations for production of blocks, paving stones, kerb stones, etc. and TENSYLAND flowformers for production of prestressed beams, hollow core slabs, etc

Barcelona


Quadra

French market leader in equipment manufacturing for the concrete industry, Quadra manufactures high-quality machinery covering all kind of precast production. Expert in automated processes and state-of-the-art vibrating system, Quadra provides everything from standalone machines right through to turn-key plants designed for producing a large range of concrete products (blocks, kerbstones, paving stones, slabs, landscaping products, and custom-made products.). - Block and paving stone making machine, - Automatic handling system, - Wet-cast production line, - Precast production line, - Grinding machine, - Various robotic solutions

Contamine sur Arve


Quanzhou HERCULES Equipment Manufacturing Co., Ltd.

Established since 1985, Honcha is the leading and most reputable manufacturer of concrete block machinery company in China. We have the largest fully-automatic block machine production manufacturing base in China.In April 2015, we were successfully listed in stock market.(stock market code: 832474) We differ ourselves in both domestic and international market by high awareness of what is needed in the industry. We constantly improve our machinery, quality and service to meet the customers' satisfaction.

Fujian


RECKLI

RECKLI stands for custom façade design with architectural concrete. As a producer of reusable elastic textured formliners, planners and architects all around the world place their trust in us - and have done for 50 years. You can use RECKLI formliners to give your exposed concrete façade a unique look. There’s no limit to your creativity. The combination of the latest machine technology and traditional craftsmanship allows unique textures, graphics, photos or three-dimensional visualizations to be realized in concrete, without breaking the bank.


Red Sea Pipes

Red Sea is committed to fulfilling enhanced requirements of fluid handling. We started business for more than 30 years and we showed presence in all markets. RSP becomes one of the leading Egyptian companies working in the plastic industry for designing and manufacturing pipes and fittings.

6th October City


Robot Construction Machinery

Dubai based specialist Providing: - Access Equipment - Lifting Equipment - Custom Made Access & Lifting System During last 12 years we have been providing custom-made lifting system & solutions, for the most prominent development and construction companies in UAE and the Gulf area. We have successfully executed many large and complicated projects providing access & lifting solutions for heavy cladding panels such as GRC, Precast, etc. Well known between countries with 100% safe works and “zero” accident history, Combines all the essential resources and skills to provide our clients with the best solution

Dubai


Rockal

Rockal initiated a new factory for the production of rockwool materials (blanket, boards, loose, pipe) from basaltic raw materials, covering a total area of 12000 m² at El-Obour city. The factory has an annual capacity of 15000 tons per year with a highly advanced technology. Rockal rockwool materials are totaly friendly to the environment. Rockwool is used for thermal and acoustical insulation as well as fire protection with applications in the construction sector, industrial sector, ship building and agriculture.

Nasr City, Cairo


Royal Gate for Automatic Doors

Has been established in 2003, Our nature of business is manufacturing, supplying, installing and providing after sales services for Overhead Sectional Doors, Rolling Shutters, Garage Doors, High Speed Doors, Traffic Barriers, Fire and Smoke Proof Doors and all kinds of Automatic Entry Systems for Industrial, Commercial and Residential Applications.

Cairo


Saint Gobain Glass Egypt

With a 900-ton daily capacity of high quality glass, Saint-Gobain Glass Egypt is the largest and most modern float facility in the Middle East. The Saint-Gobain Glass Egypt facility combines some of the most modern technology, the most advanced measurement tools and instruments as well as the know-how and expertise of the Saint-Gobain Glass international network of affiliates.

Cairo


Sel Dis Ticaret Ve Kimya Sanayi A.S.

Sel Sealants was established in 1991; Selsil being the main brand of the company. Today Sel Sealants is the largest manufacturer in the region and the “only” sealant company that produces and prints its own hdpe cartridges in the world.

Istanbul


Shandong Besteel

Shandong


SHANDONG SANZE SILICONE SEALANT CO.,LTD

Shandong Sanze Silica Gel Co., Ltd. was established in 2007 in Weifang city of Shandong province, where one of the major aluminum profile production bases in China is located. With a factory area over 50,000 square meters, Sanze is one of the largest silicone sealant manufacturer in north of China, and its automatic production lines provide an annual production capacity over 30,000 tons. Sanze manufactures a complete line of one part and two-part silicone sealants including silicone structural glazing sealant, silicone weatherproofing sealant, silicone insulating glass sealant, and silicone window assembly sealant etc. All these products comply with ISO 9001 Quality Management System and ISO 14001 Environmental Management System, and also meet Chinese national standard and ASTM standard.

Shandong


Siba Kimya Endustriyel Urunler San. Tic. Ltd. Sti.

Siba Chemical Company was founded in 2005 to serve to the construction and insulation chemicals sector along with its sophisticated technological power and solution-oriented and environment-friendly products. Sibax, the patented brand mark of Siba, offers solutions to 7 diversified industries including Construction, PVC-Aluminium, Hardware-Fittings, Furniture and Automotive.

Istanbul


Sichuan Kaiwuhua Packing Materials Co. ,Ltd.

Sichuan Kaiwuhua Packing Materials Co., Ltd,founded in 1992, which has two production base,separately located in Pixian Modern Industrial Harbor and Deyang city. Our pixian production base has a land occupation of 13200sqm,owning 4 high speed coating line for BOPP adhesive tape ,4 production lines for sensitive adhesive,50 sets of printing、cutting、slitting machines. Our DEYANG production base has a land occupation of 132000sqm,owing 4 specific masking tape production lines. Our products include BOPP packing tape and jumbo roll, masking tape and jumbo roll、stationary tape、double sided opp tape、foam tape、sensitive adhesive.professional water base make products more environmental、no residue and passed SGS certificate.

Sichuan


Sicuro

Cairo


Silikal GmbH

Based in Mainhausen, near Frankfurt am Main, Silikal has been developing and producing reactive resins for floors and building protection based on methyl methacrylate, epoxy and polyurethane for more than 60 years. The extensive product range includes products for concrete repairs, for industrial and commercial floors, waterproofing, road marking, tactile guidance systems and orthopedic resins, for example.

Mainhausen


Specialties Ltd

Cairo


Sphinx Glass

Established in 2008, Sphinx Glass is one of the fastest-growing, independently operated float glass producers in Egypt and the MENA region. The company began production in April 2010 and has since established a leading market share in each of its segments, including Architectural, silvering and Automotive quality. The range of products , from Clear Float to Tinted Float and Pyrolytic Reflective Float, offers sustainable solutions for energy conservation and environmental protection. This success is driven by the company’s consistent quality, ethics and responsibility toward its customers, shareholders, employees and the environment. Known for the superior quality of its products, thanks for using the advanced manufacturing technology, backed up by PPG (Vitro) Industries as the primary know-how and technology provider, strict quality assurance and world class raw materials. Sphinx Glass is wholly-owned by Construction Products Holding Company (CPC), one of the region’s largest manufacturers of the complete range of building materials. Our plant is strategically located neighboring the main sea-ports providing us with an advantage of being able to deliver a superior and efficient logistics service to our export markets, currently spanning across five continents. The company is certified with ISO 50001:2011, 14001-2015, 9001-2015, 18001:2007

Cairo


Star Concrete Tech Co.- Star Company for Renting Heavy Machinery

Star Concrete Tec El Toukhy Industries & Readymix Readymix Readymix Readymix Readymix Readymade Concrete Industries is a leading global provider of high quality concrete products, Concrete recycling plants, silo cement tanks and cement feed systems.

Cairo


Stream Magazine

Unique to the stream magazine the finest and the highest print quality exist in the Egyptian market The highest rate of distribution and fastest possible use of carefully planned distribution and slice docking connector as follows: - Consulting offices. - Contracting companies. - Electricity companies governmental and private companies and Control Automated. - Water companies. - Industrial areas. - Oil Companies. - Oil services companies. - Electrical Engineers Association - Faculties of engineering - Electricity markets in Cairo, Tenth of Ramadan, 6 of October and Alexandria. As well as the presence in all special exhibitions with electricity and control automation

Giza


Structureflex Egypt

Structureflex Egypt and Structureflex Middle East Contracting is one of the market leaders & specialized subcontractors in Tensile Membrane Structures for custom applications in architecture (Sports, Commercial and Transport). We have been providing our service MENA region and some African countries already since 15 years. Our support starts from the design stage throughout engineering, fabrication & installation using all different types of tensile fabrics such as PTFE, PVC & ETFE”.

El-Khalifa


Stylewood Wooden Doors & Windows

Borg El Arab


Suzhou Beecore Honeycomb Technology Co., Ltd.

Suzhou Beecore Honeycomb Materials Co.,Ltd, originated from Besin(Dutch) International Group which was founded in 1957. It is the world’s leading professional manufacturer of honeycomb materials. Since it is established, the company has been committed to the research and development of honeycomb technology, from honeycomb core, honeycomb panel, to the finished product which was using honeycomb panel as the solution, such as the aluminum honeycomb panel truck body, laser TV/projection screen etc. We always stick to the roots of continuous technological innovation, and constantly upgrade and expand the application range of the honeycomb materials, becoming the first-choice company for solutions of honeycomb materials!



SwissChem

Cairo


Taizhou Fastener Import Export Co., Ltd.

Golded point fastener limited Dainan Town, a famous town of rusty steel, has more than 10 years of manufacturing experience, with advanced equipment, advanced professional and technical personnel, and advanced management system. The factory specializes in the production of stainless steel fasteners, mainly producing bolts, nuts, tooth bars, expansion screws, screws, marble pendants, and non-standard parts, with a monthly production of 150-300 tons. The company established Taizhou City Fast Import and Export Co., Ltd. The company's products are mainly exported to the Middle East, Southeast Asia, the Americas, and Africa. The quality of our products is highly praised by customers. Our factory welcomes domestic and foreign merchants to cooperate sincerely and join hands to create a great cause.

Jiangsu


Tangshan Fengrun Shenheng Steel Co., Ltd.

Tangshan Fengrun Shenheng Steel Co., Ltd., was established in 1992, possess fixed assets of 150 million RMB and keeps annual output value of 2.5 billion RMB. Our company owns production facility and warehouse of 88,000m2 and employ more than 500 people, which include 8 senior technicians.

Hebei


TEMAK S.A.

TOTAL WATER SOLUTIONS, DESALINATION SYSTEMS, SEA & BRACKISH WATER TREATMENT SYSTEMS TEMAK operates in the Water Treatment Systems market since 1972 and has already gained the trust of its partners in the Middle East and Africa having successfully accomplished numerous projects in these areas. The company studies, designs, manufactures, installs and supports Water Treatment Systems offering integrated and reliable solutions for various market applications, such as Sea & Brackish Water Desalination Plants, Water Treatment Systems for potable use, renal dialysis units, boilers & cooling systems, power plants, food & beverage industry, steel mills, pulp & paper, photovoltaic, semiconductor, pharmaceutical industry, as well as Ultra-Pure water for labs and water makers for shipping. TEMAK not only produces standardized units, but also designs custom-made solutions for its clients. All TEMAK systems can be additionally provided in mobile units, containerized or onboard vehicles. Besides production, TEMAK offers services (such as consultancy, after sales service, installation and start up) either directly from its central offices in Greece or through its well-trained local partners around the world. Moreover, the company promotes and implements new and efficient technologies that significantly reduce energy and water consumption of the plants. TEMAK is certified by ISO 9001/2015, ISO 14001/2015 and OHSAS 18001/2007.

Athens


Tervina

Tervina is a leading company of surface And submersible pumps And electric motors

Cairo


The Sustainable City Club

The Sustainable City Club aims at promoting the French offer and at contributing to the structuration of an Egyptian sustainable city sector through the identification of needs, high potential market segments and operational decision makers. The Sustainable City Club fosters synergies between its members to propose comprehensive solutions to identified local challenges. The Sustainable City Club supports increased French SMEs involvement in Egypt.


Tianjin Jianglin Technology Development Co., Ltd..

Tiger Construction Chemicals & Specialty Contracting

TIGER is one of the companies specialized in the field of supplying and implementing building chemicals products. Since 2005, TIGER has been headquartered in the Fifth Compound in New Cairo City and has a number of branches throughout the Arab Republic of Egypt.

New Cairo City


T-MECH

Thomsun Industries have been established since 1976 and has business interests in various core industries, we have launched our piping solution sections which cater for the MEP industry specializing in PPR, PEX, PVC Conduits, GI Boxes and Metal Pipe Hangers and Supports, Thomsun Industries’ range of building systems are registered under the trade name of T-MECH and exporting to many countries worldwide.

Dubai


Top-Werk GmbH

TOPWERK develops integrative concepts and total solutions based on the symbiosis of tradition and innovation. We know where we come from and where we want to go. The daily challenge in the tension between task, technology and implementation defines the assignment every day.

Burbach-Wahlbach


Turk Prysmian Kablo Ve Sistemleri A.S.

Bursa


Unitech - Egypt for Building Materials

Unitech for Building and Construction Materials is a “Solutions Provider” company, specialized in the Design, Manufacturing and Trading of Building and Construction Materials in the region. Unitech is a member of the IKK Group of Companies. It has been present in the market since 1978 and has grown to become one of the leading companies in the supply of building materials and construction materials.

6th October City



Ventures Onsite

Ventures ONSITE, a product by Ventures Middle East, has been the market leader in tracking construction projects across the MENA region for more than 15 years. Ventures ONSITE provides you with accurate and detailed information on completed, current and future construction projects. Ventures ONSITE’s comprehensive databank will not only help you find and select the right projects for your business, but also provide a chance to explore project opportunities in new countries or industries. https://www.venturesonsite.com/subscribe

Dubai


Wacker Chemicals Middle East

WACKER is a globally active chemical group headquartered in Munich, Germany. WACKER has a 100-year history and is one of the world’s leading construction solution providers. With over 60 years’ experience in silicon chemistry, WACKER played a pioneering role in developing silicone sealants and remains a technological leader in this area. WACKER sealants are indispensable as sustainable products in virtually all key industries. The WACKER® SILICONE SEALANT brand is the product of choice for construction and industrial applications from connection and expansion joints to sanitary sealing needs. Wacker Chemicals Middle East, WACKER Group’s Dubai subsidiary, features a technical center with ultramodern labs and a training academy to cater for Middle East & Africa.

Dubai


Watera Hellas S.A.

Watera is an international Group headquartered in Luxembourg, active in the WATER TREATMENT market since 1963. In addition to Luxembourg, Watera Group is directly present, through wholly owned subsidiaries, in a number of countries in Eastern and Southern Europe, including Italy, Greece, the Czech Republic and Bulgaria, and it is also active in the Middle East, Far East and Africa. Since its founding, Watera has been dedicated to providing the technical and scientific solutions to meet the highest standards of water. Today, with the extensive experience and the unique know-how, Watera is capable to readily address and satisfy even the most demanding water treatment needs. Adhering to International standards and norms, it is certified by ISO 9001:2015, ISO 14001:2015, OHSAS 18001:2007 and Medical certificate. Watera has successfully delivered to customers, numerous water treatment systems & solutions, ranging from small household filtration appliances to very demanding large water treatment plants for producing ultra-high purity water. Watera’s main assets are its highly knowledgeable and skilled engineering and technical staff and its vertically integrated manufacturing capability. Watera offers innovative, cost-efficient, robust Technologies, Products, Systems and Solutions. Filtration, REVERSE OSMOSIS – DESALINATION, ULTRAFILTRATION, ELECTRODEIONIZATION, and WATER RECYCLING for INDUSTRY but also for DRINKING WATER for MUNICIPALITIES, HOTELS, CAMPS AND COMPOUNDS. Long term experience in CONTAINERIZED UNITS accessed and monitored from distance, for easy operation and maintenance.

Ano Liosia


Watex For Trading Agencies and Distribution

Water Technology Experts company (Watex) was created for the purpose of providing high quality products for its customers and is considered as one of the leading companies in Egypt and Africa in the electromechanical field as it contributes in providing integrated solutions systems through providing high quality products according to the international quality standards

Corniche El Nile


WINSOON IMPORT & EXPORT CO., LTD.

Guangdong


Winters Instruments

Since 1953, Winters Instruments has been manufacturing quality built instrumentation for all markets that require pressure and temperature measurement. Through the years, the company has grown in size and reputation and is now a leading, global manufacturer of industrial instrumentation. Our comprehensive product lines of pressure gauges, thermometers, diaphragm seals, transmitters, switches and accessories are brought to market by an extensive network of distribution partners and are trusted by some of the world’s most recognized Fortune 500 companies. Winters Instruments currently operates from 9 worldwide offices. In North America alone, Winters operates 3 stocking facilities, enabling distributors to access over $10 million worth of inventory.

Toronto


Wood Equipment Company Woodek

Woodek -Wood Equipment Company is a manufacturer of hotel furniture, doors, wooden floors & Pergola’s. - We have been in business since 1994. - We use the latest technology in painting lines in the world with UV (Ultraviolet) lacquering. - We have constantly been investing in automation as we have now reached a capacity level of 4 minutes for lacquering one face of a flush door with all of its processes and have it completely dried instantly. - We hold various certificates including ISO 9001 for Quality Management, ISO 14001 for Environmental management and OSHAS 18001 for Occupational Health and Safety. - We hold certification of manufacturing Fire Rated Doors using German materials with compliance to the British Standard no: BS476, and American Standard no: UL10c, for all fire resistance levels from 20 FD up to 120 FD. The end product carries a label as a grantee from the certification company for each door. - We hold the first place nation-wide in the Award of Excellence in Quality Management Systems by the Industrial Modernization Center (IMC).

Alexandria


Wuhan Changlong Century Machinery Co.,ltd

The company Wuhan Changlong Century Machinery Co.,Ltd is founded in 2006. We are now one of the leading manufacturers of rack and pinion construction hoist based in China. Our main purpose is to give vertical lifting solution for high risky building construction, bridge construction, power plant, mining industrial etc. We cooperated with many rental companies and contractors both in China and other countries, like Egypt, Brazil, Vietnam, Iran, Australia. Our clients give highly comments on our CLSJ brand construction hoist.

Hubei


Xervon Egypt S.A.E

XERVON is well-known on the market for providing top quality technical services – for building and maintaining industrial facilities as well as for a wide range of construction projects. Our key areas of expertise are scaffolding and insulation. However, we also collaborate closely with our sister companies enabling us to offer our customers a wide variety of specialist surface technology and maintenance services.

Cairo


Xiamen Freete Trade Co.,Ltd.

Registered in 2017 , Xiamen Freete Trade Co.,LTD has made a name for itself in the list of top suppliers of Diamond Cutting Tools in China. The supplier company is located in Xiamen, Fujian and is one of the leading sellers of listed products. Xiamen Freete Trade Co.,LTD is listed in Trade India's list of verified sellers offering supreme quality of 900-3000mm Diamond Cutting Segment ,Diamond Segment For Granite Marble Sandstone ,Freet Diamond Granite Segment etc. Buy Diamond Cutting Tools in bulk from us for the best quality products and service.

Fujian


Yamama Company For Red Bricks & Clay Products

Yamama Company for Red Bricks and Clay Products started production in the beginning of 1979 ( 1399H ). Since its inception, the Factories have acquired a vast experience in industry of red clay bricks.Our customers, in Saudi Arabia and Gulf Countries expressed their satisfaction with the factories products.This achievement is obtained through the great consideration given to the products quality and fulfilling of our customers projects requirements, regarding quantities, size and shapes. As a result of this, our production increased from 225 tons to 1000 tons per day. Moreover, varieties of products increased from some few products to more than one hundred items, as detailed in this brochure which includes the specifications and uses of each product. Facilities available for Yamama Company , make these factories one of the leading companies in the field of brick industry. The factories have the capability to manufacture products to any required technical specifications regarding size & shape or quality. Our products are manufactured in accordance with Saudi Standards as well as international such as ; German, British , American and others, as required by our customers projects .

Riyadh


Yellow Media

Established in 1988, Yellow Media is the official publisher of these branded products in Egypt: YP.eg, YellowMedia.com.eg and Dalili.com.eg. Our platforms generate millions of monthly buyer visits and we partner with Google, Google My Business, YouTube, Facebook, Instagram, Otlob and Vezeeta. So, whether it's on digital, social, mobile or print media channels, we specialize in making your business findable.

Cairo


Yenbu Tekstil

Gaziantep


Yildirim Sogutma Basincli Komp. San. Tic. A.S.

YILDIRIM REFRIGERATION was established in Gebze in 1996, aiming at the principle of delivering quality production at competitive prices and timely delivery. In order to meet the increasing customer needs, it provides sales and service by opening its branch with a showroom with the largest capacity in the sector in Bursa region. YILDIRIM REFRIGERATION started to produce AOY brand chillers in 1999 and CMY brand compressed air dryers in 2003, although the service sector appears to be predominantly in the organization.

Kocaeli


Youm7 Newspaper

Giza


Zamil Industrial

6th October City


Zenith - Germany

JEBAAL provides a full TURN KEY solution for the cement products industry that covered all the required parameters such as (Feasibility Study, Land Choosing, Layout Design, Proper Machine Selection, Supply all the Auxiliary Equipment’s, Operation and Maintenance Assistance, After Sale Service) ZENITH is one of the world market leaders in equipment for the concrete block / paver industry. Far more than 7,500 content customers’ worldwide trust ZENITH & we have more than 30 machines working in Egypt; the first machine was set up in Egypt in 1975.

New Cairo


Zhejiang Jinxiang Panel Industry Co., Ltd.

Zhejiang


ZHEJIANG KANGTIAN SANITARY WARES CO.,LTD

Taizhou Fengchi Sanitary Ware Co.,Ltd is located at the coastal line of East China Sea, and near the Haimen port and Huangyan airport which provides convenient transportation. Our company is one of the domestic production of various kinds of hot-water heat fitting, hygienic sanitary equipment"s outstanding factories.The product by the unique style,the novel contour,the dependable quality,the complete specification depth to the general customer"s trust and favor,and sells in distant markets national areas Southeast Asia,US,Europe and so on . Our company take"the customer supreme, unceasingly innovates" as the management objective,devoteing in realizes the products user-friendly,the sentiment influence,makes every effort on the product function completely,reliable artistic

Zhejiang


Zhongshan Tender Electric Appliance Co.,Ltd.

Guangdong


Zinco GmbH

ZinCo – one of the leading manufacturers – are pioneers and innovators in terms of extensive and intensive roof greening. Research projects and innovative systems developed by ZinCo inspire architects and demanding clients to plan both private and large public buildings in a holistic and sustainable way.

Nürtingen


Zone Technologies

“Zone Technologies”, A Zone Group limited liability Company,is the authorized dealer for many multinational manufactures ,specialized in supplying surveying solution such as (Land positioning systems), (Marine positioning systems ), (Under water & marine systems ), (Underground systems),(Drones for Arial application),measuring equipment and today is expanding to supply scientific and lab equipment to the Egyptian market. Zone Engineering & survey was founded in 1997, by the founder Mr. Moustafa Nasser to implement surveying services and also supply survey solution To the Egyptian market as it gets Trimble Navigation Limited dealership.because of the turn over growth, In 2004, Zone Engineering &Survey split into two stand-alone companies (Zone Survey & Mapping) is managed by Mr. Moustafa Nasser and specialized in implementing land & marine survey projectsand and( Zone Technologies) is managed by Mr. Amr Mosa and specialized in supplying surveying solution, measuring equipment. Zone Technologies had an authorized service center to provide maintenance for the supplied equipment and certified training center to provide training & technical support to the clients.

Cairo